How Australian university grades work

Australian universities grade units from High Distinction (HD) down to Fail, and most pass at 50. Where each band starts is not the same everywhere: an HD begins at 85 at some universities and at 80 at others. Your WAM averages your marks, and your GPA averages grade points.

Top grade
High Distinction (HD)
Pass mark
50 at most universities
Averages
WAM (marks) and GPA (grade points)

HD, D, C and P: where each band starts

There are two common sets of bands. UNSW and Adelaide University start an HD at 85, while Monash, Deakin and Victoria University start it at 80. Everyone passes at 50.

Australian grade bands
GradeUNSW and AdelaideMonash, Deakin and VU
High Distinction (HD)85 to 10080 to 100
Distinction (D)75 to 8470 to 79
Credit (C)65 to 7460 to 69
Pass (P)50 to 6450 to 59
Fail (N or F)Below 50Below 50

Source: UNSW, Guide to UNSW grades; Adelaide University, Grade point average and weighted average mark; Monash University, Results: reading your marks; Deakin University, WAM worked example and grades; Victoria University, What your results mean

Melbourne's H1 to H3

The University of Melbourne uses honours-style grades instead: H1 from 80, H2A from 75, H2B from 70, H3 from 65 and a Pass from 50.

Source: University of Melbourne, Grading schemes

WAM: your average mark

Your Weighted Average Mark (WAM) is each unit's mark times its credit points, added up and divided by your total credit points. Monash counts first-year units at half weight. Work yours out with the WAM calculator.

Source: University of Melbourne, Weighted Average Mark (WAM); Monash University, Weighted average mark (WAM)

GPA: your average grade point

GPA turns each grade into points first. Adelaide University's scale gives 7 for an HD, 6 for a Distinction, 5 for a Credit, 4 for a Pass and 1.5 for a Fail, then weights them by course units. Students who started at UniSA or the University of Adelaide use 4.5 for a Pass. Because GPA uses grades, 85 and 95 count the same, while WAM tells them apart.

Source: Adelaide University, Grade point average and weighted average mark

Grades without a mark

Where a result has a grade but no mark, UNSW counts a nominal mark: 55 for a Pass, 70 for a Credit, 80 for a Distinction, 90 for a High Distinction and 25 for a Fail.

Source: UNSW, Guide to UNSW grades

Work out where you stand

Use the WAM calculator for your average, or the weighted grade calculator for one unit's mark from each assessment's weighting.

University rules here come from each university's published regulations, linked on its page. Your exam board decides your result, and some programmes have their own rules, so check your handbook too.

Know your grade before you submit.

Grade Predictor by DoMyWork marks your draft against your brief and marking criteria, gives a predicted grade from HD to Fail and shows the fixes that would raise it. Your first check is free.

Check my work free

Questions students ask

How UK degrees are worked out
What is a High Distinction?

The top grade at Australian universities. It starts at 85 at UNSW and Adelaide University and at 80 at Monash, Deakin and Victoria University.

What mark is a Credit in Australia?

65 to 74 at UNSW and Adelaide University, and 60 to 69 at Monash, Deakin and Victoria University.

Is 50 a pass at Australian universities?

Yes, at most universities a unit passes at 50. Some courses set higher requirements for particular units, so check your handbook.

What's the difference between WAM and GPA?

WAM averages your marks out of 100, weighted by credit points. GPA averages grade points, such as 7 for an HD at Adelaide University, so two marks in the same band count the same.

We use cookies for analytics and ads to improve DoMyWork, including our own record of how pages are used and your approximate city (never your IP address). Accept or reject them; the site works either way. Privacy Policy